Antique Engine Rebuilding
(260) 824-4649 / (847) 674-6716 info@antiqueenginerebuilding.com
Short Block
- INSERTED BEARINGS
- $3,362.00 rebuild, or exchange when available
- $237.93 Installation kit recommended
Includes:
- PISTONS
- RINGS
- SS VALVES
- GUIDES
- ADJUSTABLE LIFTERS
- GEARS
- HARDENED SEATS
- INSERT MAIN BEARINGS
- CRANK GRINDING
- CAM GRINDING
- RESURFACE BLOCK
- PAINTING
- ASSEMBLY
- NEW CONNECTING RODS
Long Block
- $4,706.00 with rebuilt head
- $5,105.00 with 6:1 head
Includes above, plus:
- HEAD RECONDITIONED
- 6:1 HEAD OPTION
- OIL PAN
- VALVE COVER
- TIMING COVER
- REBUILT OIL PUMP
- FLYWHEEL
- V8 CLUTCH
- HEAD STUDS & NUTS INSTALLED
- GASKET SET INSTALLED
- INTERMEDIATE DRIVE GEAR
- SPRING & PLUNGER
- 1 PIECE PULLEY
- PAINT
- ASSEMBLY
Running Engine
- $2,336.00 added to long block rebuild
Includes above, plus:
- STARTER rebuilt
- GENERATOR rebuilt
- DISTRIBUTOR rebuilt
- IGNITION SYSTEM new
- CARBURETOR new
- WATER PUMP new
- BELT new
- FAN new
- MANIFOLDS new
- PAINT
- ASSEMBLY
- RUN TEST
- CANNOT BE SHIPPED WITH OIL FILLED
All Model B Engines include insert main bearings and new insert connecting rods with insert bearings, one piece press in valve guides with SS straight stem valves.
6:1 Hi Compression Head @ $399.00
MODEL B SHORT BLOCK REBUILDING
PARTS
| Price | |
|---|---|
| CONNECTING RODS | $770.00 |
| PISTONS | $104.50 |
| RINGS | $46.00 |
| MAIN BEARINGS | $99.00 |
| THRUST WASHERS | $38.15 |
| MODERN VALVE KIT | $136.90 |
| CAMSHAFT NUT | $12.00 |
| VALVE SEATS | $22.00 |
| LIFTERS (single lock adjustable) | $136.90 |
| CAM GEAR | $27.50 |
| CRANK GEAR | $13.20 |
| TOTAL PARTS | $1406.15 |
LABOR
| Price | |
|---|---|
| GRIND CRANKSHAFT | $250.00 |
| GRIND CAMSHAFT | $96.00 |
| ALIGN BORE BLOCK FOR INSERTS | $700.00 |
| BORE AND HONE CYLINDERS | $200.00 |
| INSTALL VALVE SEATS | $88.00 |
| FINISH VALVE SEATS | $70.40 |
| INSTALL VALVE GUIDES (press in) | $26.40 |
| RESURFACE TOP OF BLOCK | $75.00 |
| DISASSEMBLE & CLEAN | $220.00 |
| ASSEMBLE | $330.00 |
| TOTAL LABOR | $2055.80 |
| TOTAL PARTS & LABOR (If sold separately) | $3461.95 |
| PACKAGED DISCOUNTED TOTAL | $3362.00 |
Other:
| Price | |
|---|---|
| Cylinder sleeves | $32.50 each |
| Recondition head | $100.00 |
| External crack repair | $75.00 (first) |
| For any additional crack | $40.00 (Subject to inspection) |
| Heli Coils | $12.00 |
| Crack repair plugs | $11.00 |
| Drill out broken stud | $30.00 |
| Drill out broken easy out | $31.25 |